global.conf

Konfigurasi global

File global.conf berisi pengaturan konfigurasi global untuk Sponge. File ini dibuat di direktori konfigurasi/sponge di folder server anda. Banyak dari sifat ini dapat juga diganti tipe per-dunia atau per-dimensi dengan menggunakan file konfigurasi di bagian folder konfigurasi/dunia.

Below is a list of available config settings and their comments inside the global.conf file. Note that certain sections will not be filled immediately, and may optionally be added to the file when the server encounters them. There's also full example of an unmodified global.conf file at the bottom of this page, below the following list:

Catatan

The following section headings refer to the path within the configuration (and the corresponding simple class name). Each of the entries in a section refers to a configurable property in the associated class. The Type information refers to the section/class that describes the nested configuration structure.

GlobalConfig

The main configuration for Sponge: global.conf

• broken-mods

  Stopgap measures for dealing with broken mods

Type: BrokenMod

• bungeecord

  Controls how Sponge interacts with server proxies, such as BungeeCord and Velocity. Requires that the bungeecord module is enabled.

Type: BungeeCord

• cause-tracker

  Configuration options related to Sponge's cause tracking system

Type: PhaseTracker

• commands

  Configuration options related to commands, including command aliases and hidden commands.

Type: Commands

• debug

  Configuratiom options related to debugging features that are disabled by default.

Type: Debug

• entity

  Configuration options related to entities and their performance impact.

Type: Entity

• entity-activation-range

  Allows the configuration of the default entity activation ranges.

Type: EntityActivationRange

• entity-collisions

  Configuration options related to entity collision checks.

Type: EntityCollision

• exploits

  Configuration option related to sponge provided exploit patches

Type: Exploit

• general

  Contains general configuration options for Sponge that don't fit into a specific classification

Type: GlobalGeneral

• ip-sets

  Automatically assigns (permission) contexts to users that use any of the given ips. This can be used to restrict/grant permissions, based on the player's source or target ip.

Type: Map<String, List<IpSet>>

• logging

  Configuration option related to logging certain action such as chunk loading.

Type: Logging

• metrics

  Configuration options related to metric collection.

Type: Metrics

• modules

  Sponge provides a number of modules that allow for enabling or disabling certain specific features. These may be enabled or disabled below. Any changes here require a server restart as modules are applied at startup.

Type: Module

• movement-checks

  Configuration options related to minecraft's movement checks, that can be enabled or disabled.

Type: MovementChecks

• optimizations

  Configuration options related to sponge provided performance optimizations.

Type: Optimization

• permission

  Configuration options related to permissions and permission handling

Type: Permission

• player-block-tracker

  Configuration options related to tracking player interactions with blocks

Type: PlayerBlockTracker

• spawner

  Used to control spawn limits around players.

  Note: The radius uses the lower value of mob spawn range and server's view distance.

Type: Spawner

• sql

  Configuration options related to the Sql service, including connection aliases etc

Type: Sql

• teleport-helper

  Blocks to blacklist for safe teleportation.

Type: TeleportHelper

• tileentity-activation

  Configuration options related to activation ranges of tile entities.

Type: TileEntityActivation

• timings

  Module to run Aikar's Timings, profile your server performance and get a sharable web result. https://github.com/aikar/timings#aikars-minecraft-timings-viewer-v2

Type: Timings

• world

  Configuration options that will affect all worlds.

Type: GlobalWorld

• world-generation-modifiers

  World Generation Modifiers to apply to the world

Type: List<String>

broken-mods (BrokenMod)

Stopgap measures for dealing with broken mods

• broken-network-handler-mods

  A list of mod ids that have broken network handlers (they interact with the game from a Netty handler thread). All network handlers from a forcibly scheduled to run on the main thread. Note that this setting should be considered a last resort, and should only be used as a stopgap measure while waiting for a mod to properly fix the issue.

Type: List<String>

bungeecord (BungeeCord)

Controls how Sponge interacts with server proxies, such as BungeeCord and Velocity. Requires that the bungeecord module is enabled.

• ip-forwarding

  If true, allows BungeeCord to forward IP address, UUID, and Game Profile to this server.

Type: boolean

Default: false

cause-tracker (PhaseTracker)

Configuration options related to Sponge's cause tracking system

• auto-fix-null-source-block-providing-tile-entities

  A mapping that is semi-auto-populating for TileEntities whose types are found to be providing null Block sources as neighbor notifications that end up causing crashes or spam reports. If the value is set to true, then a workaround will be attempted. If not, the current BlockState at the target source will be queried from the world. This map having a specific entry of a TileEntity will prevent a log or warning come up to any logs when that null arises, and Sponge will self-rectify the TileEntity by calling the method getBlockType(). It is advised that if the mod id in question is coming up, that the mod author is notified about the error-prone usage of the field blockType. You can refer them to the following links for the issue: https://gist.github.com/gabizou/ad570dc09dfed259cac9d74284e78e8b https://github.com/SpongePowered/SpongeForge/issues/2787 Also, please provide them with these links for the example PR to fix the issue itself, as the fix is very simple: https://github.com/TehNut/Soul-Shards-Respawn/pull/24 https://github.com/Epoxide-Software/Enchanting-Plus/pull/135

Type: Map<String, Boolean>

• capture-async-spawning-entities

  If set to true, when a mod or plugin attempts to spawn an entity off the main server thread, Sponge will automatically capture said entity to spawn it properly on the main server thread. The catch to this is that some mods are not considering the consequences of spawning an entity off the server thread, and are unaware of potential race conditions they may cause. If this is set to false, Sponge will politely ignore the entity being spawned, and emit a warning about said spawn anyways.

Type: boolean

Default: true

• generate-stacktrace-per-phase

  If true, more thorough debugging for PhaseStates such that a StackTrace is created every time a PhaseState switches, allowing for more fine grained troubleshooting in the cases of runaway phase states. Note that this is not extremely performant and may have some associated costs with generating the stack traces constantly.

Type: boolean

Default: false

• max-block-processing-depth

  The maximum number of times to recursively process transactions in a single phase. Some mods may interact badly with Sponge's block capturing system, causing Sponge to end up capturing block transactions every time it tries to process an existing batch. Due to the recursive nature of the depth-first processing that Sponge uses to handle block transactions, this can result in a stack overflow, which causes us to lose all infomration about the original cause of the issue. To prevent a stack overflow, Sponge tracks the current processing depth, and aborts processing when it exceeds this threshold. The default value should almost always work properly - it's unlikely you'll ever have to change it.

Type: int

Default: 1000

• maximum-printed-runaway-counts

  If verbose is not enabled, this restricts the amount of runaway phase state printouts, usually happens on a server where a PhaseState is not completing. Although rare, it should never happen, but when it does, sometimes it can continuously print more and more. This attempts to placate that while a fix can be worked on to resolve the runaway. If verbose is enabled, they will always print.

Type: int

Default: 3

• report-null-source-blocks-on-neighbor-notifications

  If true, when a mod attempts to perform a neighbor notification on a block, some mods do not know to perform a null check on the source block of their TileEntity. This usually goes by unnoticed by other mods, because they may perform == instance equality checks instead of calling methods on the potentially null Block, but Sponge uses the block to build information to help tracking. This has caused issues in the past. Generally, this can be useful for leaving true so a proper report is generated once for your server, and can be reported to the offending mod author. This is false by default in SpongeVanilla. Review the following links for more info: https://gist.github.com/gabizou/ad570dc09dfed259cac9d74284e78e8b https://github.com/SpongePowered/SpongeForge/issues/2787

Type: boolean

Default: true

• resync-commands-from-async

  If set to true, when a mod or plugin attempts to submit a command asynchronously, Sponge will automatically capture said command and submit it for processing on the server thread. The catch to this is that some mods are performing these commands in vanilla without considering the possible consequences of such commands affecting any thread-unsafe parts of Minecraft, such as worlds, block edits, entity spawns, etc. If this is set to false, Sponge will politely ignore the command being executed, and emit a warning about said command anyways.

Type: boolean

Default: true

• verbose

  If true, the phase tracker will print out when there are too many phases being entered, usually considered as an issue of phase re-entrance and indicates an unexpected issue of tracking phases not to complete. If this is not reported yet, please report to Sponge. If it has been reported, you may disable this.

Type: boolean

Default: true

• verbose-errors

  If true, the phase tracker will dump extra information about the current phases when certain non-PhaseTracker related exceptions occur. This is usually not necessary, as the information in the exception itself can normally be used to determine the cause of the issue.

Type: boolean

Default: false

commands (Commands)

Configuration options related to commands, including command aliases and hidden commands.

• aliases

  Command aliases will resolve conflicts when multiple plugins request a specific command. Correct syntax is <unqualified command>=<plugin name> e.g. sethome=homeplugin

Type: Map<String, String>

• command-hiding

  Defines how Sponge should act when a user tries to access a command they do not have permission for

Type: CommandsHidden

• enforce-permission-checks-on-non-sponge-commands

  Some mods may not trigger a permission check when running their command. Setting this to true will enforce a check of the Sponge provided permission (<modid>.command.<commandname>). Note that setting this to true may cause some commands that are generally accessible to all to require a permission to run. Setting this to true will enable greater control over whether a command will appear in tab completion and Sponge's help command. If you are not using a permissions plugin, it is highly recommended that this is set to false (as it is by default).

Type: boolean

Default: false

• multi-world-patches

  Patches the specified commands to respect the world of the sender instead of applying the changes on the all worlds.

Type: Map<String, Boolean>

commands.command-hiding (CommandsHidden)

Defines how Sponge should act when a user tries to access a command they do not have permission for

• hide-on-discovery-attempt

  If this is true, when a user tries to tab complete a command, or use /sponge which or /sponge:help this prevents commands a user does not have permission for from being completed. Note that some commands may not show up during tab complete if a user does not have permission regardless of this setting.

Type: boolean

Default: true

• hide-on-execution-attempt

  If this is true, when a user tries to use a command they don't have permission for, Sponge will act as if the command doesn't exist, rather than showing a no permissions message.

Type: boolean

Default: false

debug (Debug)

Configuratiom options related to debugging features that are disabled by default.

• concurrent-chunk-map-checks

  Detect and prevent parts of PlayerChunkMap being called off the main thread. This may decrease sever preformance, so you should only enable it when debugging a specific issue.

Type: boolean

Default: false

• concurrent-entity-checks

  Detect and prevent certain attempts to use entities concurrently.

  WARNING: May drastically decrease server performance. Only set this to true to debug a pre-existing issue.

Type: boolean

Default: false

• thread-contention-monitoring

  If true, Java's thread contention monitoring for thread dumps is enabled.

Type: boolean

Default: false

entity (Entity)

Configuration options related to entities and their performance impact.

• collision-warn-size

  Number of colliding entities in one spot before logging a warning. Set to 0 to disable.

Type: int

Default: 200

• entity-painting-respawn-delay

  Number of ticks before a painting is respawned on clients when their art is changed.

Type: int

Default: 2

• human-player-list-remove-delay

  Number of ticks before the fake player entry of a human is removed from the tab list (ranges from 0 to 100 ticks).

Type: int

Default: 10

• item-despawn-rate

  Controls the time in ticks for when an item despawns.

Type: int

Default: 6000

• living-hard-despawn-range

  The upper bounded range where living entities farther from a player will likely despawn.

Type: int

Default: 128

• living-soft-despawn-minimum-life

  The amount of seconds before a living entity between the soft and hard despawn ranges from a player to be considered for despawning.

Type: int

Default: 30

• living-soft-despawn-range

  The lower bounded range where living entities near a player may potentially despawn.

Type: int

Default: 32

• max-bounding-box-size

  Maximum size of an entity's bounding box before removing it. Set to 0 to disable.

Type: int

Default: 1000

• max-speed

  Square of the maximum speed of an entity before removing it. Set to 0 to disable.

Type: int

Default: 100

entity-activation-range (EntityActivationRange)

Allows the configuration of the default entity activation ranges.

• auto-populate

  If true, newly discovered entities will be added to this config with a default value.

Type: boolean

Default: false

• defaults

  Default activation ranges used for all entities unless overridden.

Type: Map<String, Integer>

• mods

  Per-mod overrides. Refer to the minecraft default mod for example.

Type: Map<String, EntityActivationMod>

entity-activation-range.mods (EntityActivationMod)

Per-mod overrides. Refer to the minecraft default mod for example.

• defaults

  Default activation ranges used for mod entities unless overridden.

Type: Map<String, Integer>

• enabled

  If false, entity activation rules for this mod will be ignored and always tick.

Type: boolean

Default: true

• entities

  The mod entities with their name as key and the range as value

Type: Map<String, Integer>

entity-collisions (EntityCollision)

Configuration options related to entity collision checks.

• auto-populate

  If true, newly discovered entities/blocks will be added to this config with a default value.

Type: boolean

Default: false

• max-entities-within-aabb

  Maximum amount of entities any given entity or block can collide with. This improves performance when there are more than 8 entities on top of each other such as a 1x1 spawn pen. Set to 0 to disable.

Type: int

Default: 8

• mods

  Per-mod overrides. Refer to the minecraft default mod for example.

Type: Map<String, CollisionMod>

entity-collisions.mods (CollisionMod)

Per-mod overrides. Refer to the minecraft default mod for example.

• defaults

  Default maximum collisions used for all entities unless overridden.

Type: Map<String, Integer>

• enabled

  If false, entity collision rules for this mod will be ignored.

Type: boolean

Default: true

• entities

Type: Map<String, Integer>

exploits (Exploit)

Configuration option related to sponge provided exploit patches

• book-size-total-multiplier

  If limit-book-size is enabled, controls the multiplier applied to each book page size

Type: double

Default: 0.98

• filter-invalid-entities-on-chunk-save

  Enables filtering invalid entities when a chunk is being saved such that the entity that does not belong in the saving chunk will not be saved, and forced an update to the world's tracked entity lists for chunks. See https://github.com/PaperMC/Paper/blob/fd1bd5223a461b6d98280bb8f2d67280a30dd24a/Spigot-Server-Patches/0311-Prevent-Saving-Bad-entities-to-chunks.patch

Type: boolean

Default: true

• limit-book-size

  Limits the size of a book that can be sent by the client. See https://github.com/PaperMC/Paper/blob/f8058a8187da9f6185d95bb786783e12c79c8b18/Spigot-Server-Patches/0403-Book-Size-Limits.patch (Only affects SpongeVanilla)

Type: boolean

Default: true

• load-chunk-on-position-set

  Enables forcing a chunk load when an entity position is set. Usually due to teleportation, vehicle movement etc. can a position lead an entity to no longer exist within it's currently marked and tracked chunk. This will enable that chunk for the position is loaded. Part of several exploits. See https://github.com/PaperMC/Paper/blob/fd1bd5223a461b6d98280bb8f2d67280a30dd24a/Spigot-Server-Patches/0335-Ensure-chunks-are-always-loaded-on-hard-position-set.patch (Only affects SpongeVanilla)

Type: boolean

Default: true

• mark-chunks-as-dirty-on-entity-list-modification

  Enables forcing chunks to save when an entity is added or removed from said chunk. This is a partial fix for some exploits using vehicles. See https://github.com/PaperMC/Paper/blob/fd1bd5223a461b6d98280bb8f2d67280a30dd24a/Spigot-Server-Patches/0306-Mark-chunk-dirty-anytime-entities-change-to-guarante.patch (Only affects SpongeVanilla)

Type: boolean

Default: true

• max-book-page-size

  If limit-book-size is enabled, controls the maximum size of a book page

Type: int

Default: 2560

• prevent-creative-itemstack-name-exploit

  Mencegah eksploitasi di mana klien mengirim paket dengan nama jenis tumpukan melebihi batas rangkaian.

Type: boolean

Default: true

• sync-player-positions-for-vehicle-movement

  Enables forcing updates to the player's location on vehicle movement. This is partially required to update the server's understanding of where the player exists, and allows chunk loading issues to be avoided with laggy connections and/or hack clients. See https://github.com/PaperMC/Paper/blob/fd1bd5223a461b6d98280bb8f2d67280a30dd24a/Spigot-Server-Patches/0378-Sync-Player-Position-to-Vehicles.patch (Only affects SpongeVanilla)

Type: boolean

Default: true

• update-tracked-chunk-on-entity-move

  Enables forcing a chunk-tracking refresh on entity movement. This enables a guarantee that the entity is tracked in the proper chunk when moving. See https://github.com/PaperMC/Paper/blob/fd1bd5223a461b6d98280bb8f2d67280a30dd24a/Spigot-Server-Patches/0315-Always-process-chunk-registration-after-moving.patch (Only affects SpongeVanilla)

Type: boolean

Default: true

general (GlobalGeneral)

Contains general configuration options for Sponge that don't fit into a specific classification

• check-file-when-saving-sponge-data-file

  If true, Sponge will try to ensure that its data is on disk when saving the level_sponge.dat file, but this may cause a slight performance hit. Setting this to false will mean Sponge does not perform any consistency checks, but you may end up with corrupt data if an unexpected failure occurs on your server, requiring restoring this file from backup.

Type: boolean

Default: true

• config-dir

  The directory for Sponge plugin configurations, relative to the execution root or specified as an absolute path. Note that the default: ${CANONICAL_GAME_DIR}/config is going to use the config directory in the root game directory. If you wish for plugin configs to reside within a child of the configuration directory, change the value to, for example, ${CANONICAL_CONFIG_DIR}/sponge/plugins.

  Note: It is not recommended to set this to ${CANONICAL_CONFIG_DIR}/sponge, as there is a possibility that plugin configurations can conflict the Sponge core configurations.

Type: String

Default: ${CANONICAL_GAME_DIR}/config

• file-io-thread-sleep

  If true, sleeping between chunk saves will be enabled, beware of memory issues.

Type: boolean

Default: false

• plugins-dir

  Additional directory to search for plugins, relative to the execution root or specified as an absolute path. Note that the default: ${CANONICAL_MODS_DIR}/plugins is going to search for a plugins folder in the mods directory. If you wish for the plugins folder to reside in the root game directory, change the value to ${CANONICAL_GAME_DIR}/plugins.

Type: String

Default: ${CANONICAL_MODS_DIR}/plugins

logging (Logging)

Configuration option related to logging certain action such as chunk loading.

• block-break

  Log when blocks are broken

Type: boolean

Default: false

• block-modify

  Log when blocks are modified

Type: boolean

Default: false

• block-place

  Log when blocks are placed

Type: boolean

Default: false

• block-populate

  Log when blocks are populated in a chunk

Type: boolean

Default: false

• block-tracking

  Log when blocks are placed by players and tracked

Type: boolean

Default: false

• chunk-gc-queue-unload

  Log when chunks are queued to be unloaded by the chunk garbage collector.

Type: boolean

Default: false

• chunk-load

  Log when chunks are loaded

Type: boolean

Default: false

• chunk-unload

  Log when chunks are unloaded

Type: boolean

Default: false

• entity-collision-checks

  Whether to log entity collision/count checks

Type: boolean

Default: false

• entity-death

  Log when living entities are destroyed

Type: boolean

Default: false

• entity-despawn

  Log when living entities are despawned

Type: boolean

Default: false

• entity-spawn

  Log when living entities are spawned

Type: boolean

Default: false

• entity-speed-removal

  Whether to log entity removals due to speed

Type: boolean

Default: false

• exploit-itemstack-name-overflow

  Log when server receives exploited packet with itemstack name exceeding string limit.

Type: boolean

Default: false

• exploit-respawn-invisibility

  Log when player attempts to respawn invisible to surrounding players.

Type: boolean

Default: false

• exploit-sign-command-updates

  Log when server receives exploited packet to update a sign containing commands from player with no permission.

Type: boolean

Default: false

• log-stacktraces

  Add stack traces to dev logging

Type: boolean

Default: false

• transaction-merge-fail

  Log when two conflicting changes are merged into one. (This number specifies the maximum number of messages to log. Set to 0 to show all messages.)

Type: int

Default: 25

• world-auto-save

  Log when a world auto-saves its chunk data.

  Note: This may be spammy depending on the auto-save-interval configured for world.

Type: boolean

Default: false

metrics (Metrics)

Configuration options related to metric collection.

• global-state

  The global collection state that should be respected by all plugins that have no specified collection state. If undefined then it is treated as disabled.

Type: Tristate

Possible values:

- TRUE

- FALSE

- UNDEFINED

Default: UNDEFINED

• plugin-states

  Plugin-specific collection states that override the global collection state.

Type: Map<String, Tristate>

Possible values:

- TRUE

- FALSE

- UNDEFINED

modules (Module)

Sponge provides a number of modules that allow for enabling or disabling certain specific features. These may be enabled or disabled below. Any changes here require a server restart as modules are applied at startup.

• broken-mod

  Enables experimental fixes for broken mods

Type: boolean

Default: false

• bungeecord

  The BungeeCord Module, allows Sponge to be used with a Proxy like Bungeecord or Velocity. Usually you want to also enable bungeecord.ip-forwarding with this.

Type: boolean

Default: false

• entity-activation-range

  The entity activation module, allows you to tweak entity activation ranges, similarly to Entity Distance in the latest 1.16 snapshots but per mob. Essentially, it changes how far an entity can be away from a player, until it stops being updated (e.g. moving).

Type: boolean

Default: true

• entity-collisions

  Module that allows you to configure the maximum amount of entities a specific entity or block can collide with.

Type: boolean

Default: true

• exploits

  Controls whether any exploit patches are applied. If there are issues with any specific exploits, please test in the exploit category first, before disabling all exploits with this toggle.

Type: boolean

Default: true

• movement-checks

  Allows configuring Vanilla movement and speed checks

Type: boolean

Default: false

• optimizations

Type: boolean

Default: true

• realtime

  Use real (wall) time instead of ticks as much as possible

Type: boolean

Default: false

• tileentity-activation

  Controls block range and tick rate of tileentities. Use with caution as this can break intended functionality.

Type: boolean

Default: false

• timings

  Module to run Aikar's Timings, profile your server performance and get a sharable web result. https://github.com/aikar/timings#aikars-minecraft-timings-viewer-v2

Type: boolean

Default: true

• tracking

  Can be used to disable some parts of the tracking.

Type: boolean

Default: true

movement-checks (MovementChecks)

Configuration options related to minecraft's movement checks, that can be enabled or disabled.

• moved-wrongly

  Controls whether the player/entity moved wrongly! check will be enforced

Type: boolean

Default: true

• player-moved-too-quickly

  Controls whether the player moved too quickly! check will be enforced

Type: boolean

Default: true

• player-vehicle-moved-too-quickly

  Controls whether the vehicle of player moved too quickly! check will be enforced

Type: boolean

Default: true

optimizations (Optimization)

Configuration options related to sponge provided performance optimizations.

• async-lighting

  Runs lighting updates asynchronously.

Type: AsyncLighting

• cache-tameable-owners

  Caches tameable entities owners to avoid constant lookups against data watchers. If mods cause issues, disable this.

Type: boolean

Default: true

• disable-failing-deserialization-log-spam

  Occasionally, some built in advancements, recipes, etc. can fail to deserialize properly which ends up potentially spamming the server log and the original provider of the failing content is not able to fix them. This provides an option to suppress the exceptions printing out in the log.

Type: boolean

Default: true

• disable-pathfinding-chunk-loads

  In vanilla, pathfinding may result in loading chunks. You can disable that here, which may result in a performance improvement. This may not work well with mods.

Type: boolean

Default: false

• disable-raytracing-chunk-loads

  In vanilla, ray tracing may result in loading chunks. You can disable that here, which may result in a performance improvement. This may not work well with mods.

Type: boolean

Default: false

• drops-pre-merge

  If true, block item drops are pre-processed to avoid having to spawn extra entities that will be merged post spawning. Usually, Sponge is smart enough to determine when to attempt an item pre-merge and when not to, however, in certain cases, some mods rely on items not being pre-merged and actually spawned, in which case, the items will flow right through without being merged.

Type: boolean

Default: true

• eigen-redstone

  Uses theosib's redstone algorithms to completely overhaul the way redstone works.

Type: EigenRedstone

• enchantment-helper-leak-fix

  If true, provides a fix for possible leaks through Minecraft's enchantment helper code that can leak entity and world references without much interaction Forge native (so when running SpongeForge implementation) has a similar patch, but Sponge's patch works a little harder at it, but Vanilla (SpongeVanilla implementation) does NOT have any of the patch, leading to the recommendation that this patch is enabled for sure when using SpongeVanilla implementation. See https://bugs.mojang.com/browse/MC-128547 for more information.

Type: boolean

Default: true

• faster-thread-checks

  If true, allows for Sponge to make better assumptinos on single threaded operations with relation to various checks for server threaded operations. This is default to true due to Sponge being able to precisely inject when the server thread is available. This should make an already fast operation much faster for better thread checks to ensure stability of sponge's systems.

Type: boolean

Default: true

• map-optimization

  If true, re-writes the incredibly inefficient Vanilla Map code. This yields enormous performance enhancements when using many maps, but has a tiny chance of breaking mods that invasively modify Vanilla. It is strongly recommended to keep this on, unless explicitly advised otherwise by a Sponge developer

Type: boolean

Default: true

• optimize-hoppers

  Based on Aikar's optimizations of Hoppers, setting this to true will allow for hoppers to save performing server -> client updates when transferring items. Because hoppers can transfer items multiple times per tick, these updates can get costly on the server, with little to no benefit to the client. Because of the nature of the change, the default will be false due to the inability to pre-emptively foretell whether mod compatibility will fail with these changes or not. Refer to: https://github.com/PaperMC/Paper/blob/8175ec916f31dcd130fe0884fe46bdc187d829aa/Spigot-Server-Patches/0269-Optimize-Hoppers.patch for more details.

Type: boolean

Default: false

• panda-redstone

  If true, uses Panda4494's redstone implementation which improves performance. See https://bugs.mojang.com/browse/MC-11193 for more information.

  Note: This optimization has a few issues which are explained in the bug report. We strongly recommend using eigen redstone over this implementation as this will be removed in a future release.

Type: boolean

Default: false

• structure-saving

  Handles structures that are saved to disk. Certain structures can take up large amounts of disk space for very large maps and the data for these structures is only needed while the world around them is generating. Disabling saving of these structures can save disk space and time during saves if your world is already fully generated.

  Warning: disabling structure saving will break the vanilla locate command.

Type: StructureSave

• use-active-chunks-for-collisions

  Vanilla performs a lot of is area loaded checks during entity collision calculations with blocks, and because these calculations require fetching the chunks to see if they are loaded, before getting the block states from those chunks, there can be some small performance increase by checking the entity's owned active chunk it may currently reside in. Essentially, instead of asking the world if those chunks are loaded, the entity would know whether it's chunks are loaded and that neighbor's chunks are loaded.

Type: boolean

Default: false

optimizations.async-lighting (AsyncLighting)

Runs lighting updates asynchronously.

• enabled

  If true, lighting updates are run asynchronously.

Type: boolean

Default: true

• num-threads

  The amount of threads to dedicate for asynchronous lighting updates.

Type: int

Default: 2

optimizations.eigen-redstone (EigenRedstone)

Uses theosib's redstone algorithms to completely overhaul the way redstone works.

• enabled

  If true, uses theosib's redstone implementation which improves performance. See https://bugs.mojang.com/browse/MC-11193 and https://bugs.mojang.com/browse/MC-81098 for more information.

  Note: We cannot guarantee compatibility with mods. Use at your discretion.

Type: boolean

Default: false

• vanilla-decrement

  If true, restores the vanilla algorithm for computing wire power levels when powering off.

Type: boolean

Default: false

• vanilla-search

  If true, restores the vanilla algorithm for propagating redstone wire changes.

Type: boolean

Default: false

optimizations.structure-saving (StructureSave)

Handles structures that are saved to disk. Certain structures can take up large amounts of disk space for very large maps and the data for these structures is only needed while the world around them is generating. Disabling saving of these structures can save disk space and time during saves if your world is already fully generated.

Warning: disabling structure saving will break the vanilla locate command.

• auto-populate

  If true, newly discovered structures will be added to this config with a default value of true. This is useful for finding out potentially what structures are being saved from various mods, and allowing those structures to be selectively disabled.

Type: boolean

Default: false

• enabled

  Global switch to enable sponge's changes to the structure saving mechansim. By default, this option is disabled, i.e. saving structures is not affected. If you want to prevent a certain named structure being saved to the world's folder, you have to enable this module/setting and disable the structure in the further settings. An example of a structure being costly and somewhat irrelevant is mineshaft, as they build and save several structures even after the mine shafts have been completely generated. However, this has the disadvantage that these structures may no longer be locatable by some mods.

Type: boolean

Default: false

• mods

  Per-mod overrides. Refer to the minecraft default mod for example.

Type: Map<String, StructureMod>

optimizations.structure-saving.mods (StructureMod)

Per-mod overrides. Refer to the minecraft default mod for example.

• enabled

  Global flag, whether this mod's structures will be saved. If false, this mod will never save its structures. If true, it will check the structureList for disabled structures.

Type: boolean

Default: true

• structures

  The configuration for each structure. A value of false prevents that structure from being saved. Entries that are either missing in this list or have the value true will still be saved, unless the structure saving of the mod is globally disabled.

Type: Map<String, Boolean>

permission (Permission)

Configuration options related to permissions and permission handling

• forge-permissions-handler

  If true, Sponge plugins will be used to handle permissions rather than any Forge mod

Type: boolean

Default: false

player-block-tracker (PlayerBlockTracker)

Configuration options related to tracking player interactions with blocks

• block-blacklist

  Block IDs that will be blacklisted for player block placement tracking.

Type: List<String>

• enabled

  If true, adds player tracking support for block positions.

  Note: This should only be disabled if you do not care who caused a block to change.

Type: boolean

Default: true

spawner (Spawner)

Used to control spawn limits around players.

Note: The radius uses the lower value of mob spawn range and server's view distance.

• spawn-limit-ambient

  The number of ambients the spawner can potentially spawn around a player.

Type: int

Default: 15

• spawn-limit-animal

  The number of animals the spawner can potentially spawn around a player.

Type: int

Default: 15

• spawn-limit-aquatic

  The number of aquatics the spawner can potentially spawn around a player.

Type: int

Default: 5

• spawn-limit-monster

  The number of monsters the spawner can potentially spawn around a player.

Type: int

Default: 70

• tick-rate-ambient

  The ambient spawning tick rate. Default: 400

Type: int

Default: 400

• tick-rate-animal

  The animal spawning tick rate. Default: 400

Type: int

Default: 400

• tick-rate-aquatic

  The aquatic spawning tick rate. Default: 1

Type: int

Default: 1

• tick-rate-monster

  The monster spawning tick rate. Default: 1

Type: int

Default: 1

sql (Sql)

Configuration options related to the Sql service, including connection aliases etc

• aliases

  Aliases for SQL connections, in the format jdbc:protocol://[username[:password]@]host/database

Type: Map<String, String>

teleport-helper (TeleportHelper)

Blocks to blacklist for safe teleportation.

• force-blacklist

  If true, this blacklist will always be respected, otherwise, plugins can choose whether or not to respect it.

Type: boolean

Default: false

• unsafe-body-block-ids

  Block IDs that are listed here will not be selected by Sponge's safe teleport routine as a safe block for players to warp into. You should only list blocks here that are incorrectly selected, solid blocks that prevent movement are automatically excluded.

Type: List<String>

• unsafe-floor-block-ids

  Block IDs that are listed here will not be selected by Sponge's safe teleport routine as a safe floor block.

Type: List<String>

tileentity-activation (TileEntityActivation)

Configuration options related to activation ranges of tile entities.

• auto-populate

  If true, newly discovered tileentities will be added to this config with default settings.

Type: boolean

Default: false

• default-block-range

  Default activation block range used for all tileentities unless overridden.

Type: int

Default: 64

• default-tick-rate

  Default tick rate used for all tileentities unless overridden.

Type: int

Default: 1

• mods

  Per-mod overrides. Refer to the minecraft default mod for example.

Type: Map<String, TileEntityActivationMod>

tileentity-activation.mods (TileEntityActivationMod)

Per-mod overrides. Refer to the minecraft default mod for example.

• block-range

  A list of tile/block entities with block name as key and their range as value.

Type: Map<String, Integer>

• default-block-range

  Default activation block range used for all tileentities unless overridden.

Type: Integer

• default-tick-rate

  Default tick rate used for all tileentities unless overridden.

Type: Integer

• enabled

  If false, tileentity activation rules for this mod will be ignored and always tick.

Type: boolean

Default: true

• tick-rate

  A list of tile/block entities with block name as key and their tick rate as value

Type: Map<String, Integer>

timings (Timings)

Module to run Aikar's Timings, profile your server performance and get a sharable web result. https://github.com/aikar/timings#aikars-minecraft-timings-viewer-v2

• enabled

  Enables the timing module

Type: boolean

Default: true

• hidden-config-entries

  These configuration entries/paths/sections are removed before the report is sent. This is to prevent credentials from being leaked unintentionally.

  Note: The sponge.sql section is always ignored and thus is never sent to the webviewer regardless of this config.

Type: List<String>

• history-interval

  Modulo value how often a tick should be pushed to the timings history

Type: int

Default: 300

• history-length

  How long the list of said history can get

Type: int

Default: 3600

• server-name-privacy

  Hides the server name in the Aikar webviewer to no leak the l337 server you are running

Type: boolean

Default: false

• verbose

  Enables the verbose mode for the timings module.

Type: boolean

Default: false

world (GlobalWorld)

Configuration options that will affect all worlds.

• auto-player-save-interval

  Tersimpan otomatis digunakan saat menyimpan data pemain global.

  Note: 20 ticks is equivalent to 1 second. Set to 0 to disable.

Type: int

Default: 900

• auto-save-interval

  The auto-save tick interval used to save all loaded chunks in a world. Set to 0 to disable.

  Note: 20 ticks is equivalent to 1 second.

Type: int

Default: 900

• chunk-gc-load-threshold

  Jumlah yang baru dimuat potongan sebelum memicu paksa pembersihan.

  Note: When triggered, the loaded chunk threshold will reset and start incrementing. Disabled by default.

Type: int

Default: 0

• chunk-gc-tick-interval

  The tick interval used to cleanup all inactive chunks that have leaked in a world. Set to 0 to disable which restores vanilla handling.

Type: int

Default: 600

• chunk-unload-delay

  Jumlah detik untuk menunda bongkar muat sekali ditandai tidak aktif.

  Note: This gets reset if the chunk becomes active again.

Type: int

Default: 15

• deny-chunk-requests

  If true, any request for a chunk not currently loaded will be denied (exceptions apply for things like world gen and player movement).

  Warning: As this is an experimental setting for performance gain, if you encounter any issues then we recommend disabling it.

Type: boolean

Default: true

• deny-neighbor-notification-chunk-requests

  If true, any neighbour notification for a chunk not currently loaded will be denied

  Warning: As this is an experimental setting for performance gain, if you encounter any issues then we recommend disabling it.

Type: boolean

Default: false

• gameprofile-lookup-task-interval

  The interval, in seconds, used by the GameProfileQueryTask to process queued GameProfile requests.

  Note: This setting should be raised if you experience the following error: The client has sent too many requests within a certain amount of time. Finally, if set to 0 or less, the default interval will be used.

Type: int

Default: 4

• generate-spawn-on-load

  If true, this world will generate its spawn the moment its loaded.

Type: Boolean

Default: false

• invalid-lookup-uuids

  The list of uuid's that should never perform a lookup against Mojang's session server.

  Note: If you are using SpongeForge, make sure to enter any mod fake player's UUID to this list.

Type: List<UUID>

• item-merge-radius

  The defined merge radius for Item entities such that when two items are within the defined radius of each other, they will attempt to merge. Usually, the default radius is set to 0.5 in Vanilla, however, for performance reasons 2.5 is generally acceptable.

  Note: Increasing the radius higher will likely cause performance degradation with larger amount of items as they attempt to merge and search nearby areas for more items. Setting to a negative value is not supported!

Type: double

Default: 2.5

• keep-spawn-loaded

  If true, this worlds spawn will remain loaded with no players.

Type: Boolean

Default: true

• leaf-decay

  If true, natural leaf decay is allowed.

Type: boolean

Default: true

• load-on-startup

  If true, this world will load on startup.

Type: Boolean

Default: false

• max-chunk-lifetime

  The number of ticks a chunk will stay in memory without saving.

  Note: this setting only applies to chunks gc forcibly saving chunks (controlled by chunk-gc-tick-interval and chunk-gc-load-threshold)

  Note: Useless if auto-save-interval is enabled and less than this value

  Note: auto-save-interval becomes mostly useless if both are enabled and it is bigger than this value

Type: int

Default: 0

• max-chunk-unloads-per-tick

  The maximum number of queued unloaded chunks that will be unloaded in a single tick.

  Note: this setting only controls the amount chunk gc is allowed to save (controlled by chunk-gc-tick-interval and chunk-gc-load-threshold)

  Note: If the maximum unloads is too low, too many chunks may remain loaded on the world and increases the chance for a drop in tps.

Type: int

Default: 100

• mob-spawn-range

  Specifies the radius (in chunks) of where creatures will spawn. This value is capped to the current view distance setting in server.properties

Type: int

Default: 4

• portal-agents

  A list of all detected portal agents used in this world. In order to override, change the target world name to any other valid world.

  Note: If world is not found, it will fallback to default.

Type: Map<String, String>

• pvp-enabled

  If true, this world will allow PVP combat.

Type: boolean

Default: true

• view-distance

  Override world distance per world/dimension The value must be greater than or equal to 3 and less than or equal to 32 The server-wide view distance will be used when the value is -1.

Type: int

Default: -1

• weather-ice-and-snow

  If true, natural formation of ice and snow in supported biomes will be allowed.

Type: boolean

Default: true

• weather-thunder

  If true, thunderstorms will be initiated in supported biomes.

Type: boolean

Default: true

• world-enabled

  If true, this world will be registered.

Type: boolean

Default: true

---

This configuration file was generated using SpongeForge 7.3.0 (Forge 2838, SpongeAPI 7.3):

# 1.0
# 
# # If you need help with the configuration or have any questions related to Sponge,
# # join us at the IRC or drop by our forums and leave a post.
# 
# # IRC: #sponge @ irc.esper.net ( https://webchat.esper.net/?channel=sponge )
# # Forums: https://forums.spongepowered.org/
# 

sponge {
    # Stopgap measures for dealing with broken mods
    broken-mods {
        # A list of mod ids that have broken network handlers (they interact with the game from a Netty handler thread).
        # All network handlers from a forcibly scheduled to run on the main thread.
        # Note that this setting should be considered a last resort, and should only be used as a stopgap measure
        # while waiting for a mod to properly fix the issue.
        broken-network-handler-mods=[]
    }
    # Controls how Sponge interacts with server proxies, such as BungeeCord and Velocity.
    # Requires that the 'bungeecord' module is enabled.
    bungeecord {
        # If 'true', allows BungeeCord to forward IP address, UUID, and Game Profile to this server.
        ip-forwarding=false
    }
    # Configuration options related to Sponge's cause tracking system
    cause-tracker {
        # A mapping that is semi-auto-populating for TileEntities whose types
        # are found to be providing 'null' Block sources as neighbor notifications
        # that end up causing crashes or spam reports. If the value is set to
        # 'true', then a "workaround" will be attempted. If not, the
        # current BlockState at the target source will be queried from the world.
        # This map having a specific
        # entry of a TileEntity will prevent a log or warning come up to any logs
        # when that 'null' arises, and Sponge will self-rectify the TileEntity
        # by calling the method "getBlockType()". It is advised that if the mod
        # id in question is coming up, that the mod author is notified about the
        # error-prone usage of the field "blockType". You can refer them to
        # the following links for the issue:
        # https://gist.github.com/gabizou/ad570dc09dfed259cac9d74284e78e8b
        # https://github.com/SpongePowered/SpongeForge/issues/2787
        # Also, please provide them with these links for the example PR to
        # fix the issue itself, as the fix is very simple:
        # https://github.com/TehNut/Soul-Shards-Respawn/pull/24
        # https://github.com/Epoxide-Software/Enchanting-Plus/pull/135
        # 
        auto-fix-null-source-block-providing-tile-entities {}
        # If set to 'true', when a mod or plugin attempts to spawn an entity
        # off the main server thread, Sponge will automatically
        # capture said entity to spawn it properly on the main
        # server thread. The catch to this is that some mods are
        # not considering the consequences of spawning an entity
        # off the server thread, and are unaware of potential race
        # conditions they may cause. If this is set to false,
        # Sponge will politely ignore the entity being spawned,
        # and emit a warning about said spawn anyways.
        capture-async-spawning-entities=true
        # If 'true', more thorough debugging for PhaseStates
        # such that a StackTrace is created every time a PhaseState
        # switches, allowing for more fine grained troubleshooting
        # in the cases of runaway phase states. Note that this is
        # not extremely performant and may have some associated costs
        # with generating the stack traces constantly.
        generate-stacktrace-per-phase=false
        # The maximum number of times to recursively process transactions in a single phase.
        # Some mods may interact badly with Sponge's block capturing system, causing Sponge to
        # end up capturing block transactions every time it tries to process an existing batch.
        # Due to the recursive nature of the depth-first processing that Sponge uses to handle block transactions,
        # this can result in a stack overflow, which causes us to lose all infomration about the original cause of the issue.
        # To prevent a stack overflow, Sponge tracks the current processing depth, and aborts processing when it exceeds
        # this threshold.
        # The default value should almost always work properly - it's unlikely you'll ever have to change it.
        max-block-processing-depth=1000
        # If verbose is not enabled, this restricts the amount of
        # runaway phase state printouts, usually happens on a server
        # where a PhaseState is not completing. Although rare, it should
        # never happen, but when it does, sometimes it can continuously print
        # more and more. This attempts to placate that while a fix can be worked on
        # to resolve the runaway. If 'verbose' is enabled, they will always print.
        maximum-printed-runaway-counts=3
        # If true, when a mod attempts to perform a neighbor notification
        # on a block, some mods do not know to perform a 'null' check
        # on the source block of their TileEntity. This usually goes by
        # unnoticed by other mods, because they may perform '==' instance
        # equality checks instead of calling methods on the potentially
        # null Block, but Sponge uses the block to build information to
        # help tracking. This has caused issues in the past. Generally,
        # this can be useful for leaving 'true' so a proper report is
        # generated once for your server, and can be reported to the
        # offending mod author.
        # This is 'false' by default in SpongeVanilla.
        # Review the following links for more info:
        # https://gist.github.com/gabizou/ad570dc09dfed259cac9d74284e78e8b
        # https://github.com/SpongePowered/SpongeForge/issues/2787
        # 
        report-null-source-blocks-on-neighbor-notifications=false
        # If set to 'true', when a mod or plugin attempts to submit a command
        # asynchronously, Sponge will automatically capture said command
        # and submit it for processing on the server thread. The catch to
        # this is that some mods are performing these commands in vanilla
        # without considering the possible consequences of such commands
        # affecting any thread-unsafe parts of Minecraft, such as worlds,
        # block edits, entity spawns, etc. If this is set to false, Sponge
        # will politely ignore the command being executed, and emit a warning
        # about said command anyways.
        resync-commands-from-async=true
        # If 'true', the phase tracker will print out when there are too many phases
        # being entered, usually considered as an issue of phase re-entrance and
        # indicates an unexpected issue of tracking phases not to complete.
        # If this is not reported yet, please report to Sponge. If it has been
        # reported, you may disable this.
        verbose=true
        # If 'true', the phase tracker will dump extra information about the current phases
        # when certain non-PhaseTracker related exceptions occur. This is usually not necessary, as the information
        # in the exception itself can normally be used to determine the cause of the issue.
        verbose-errors=false
    }
    # Configuration options related to commands, including command aliases and hidden commands.
    commands {
        # Command aliases will resolve conflicts when multiple plugins request a specific command.
        # Correct syntax is '<unqualified command>=<plugin name>' e.g. 'sethome=homeplugin'
        aliases {}
        # Defines how Sponge should act when a user tries to access a command they do not have
        # permission for
        command-hiding {
            # If this is true, when a user tries to tab complete a command, or use "/sponge which" or
            # "/sponge:help" this prevents commands a user does not have permission for from being completed.
            # 
            # Note that some commands may not show up during tab complete if a user does not have permission
            # regardless of this setting.
            hide-on-discovery-attempt=true
            # If this is true, when a user tries to use a command they don't have permission for, Sponge
            # will act as if the command doesn't exist, rather than showing a no permissions message.
            hide-on-execution-attempt=false
        }
        # Some mods may not trigger a permission check when running their command. Setting this to
        # 'true' will enforce a check of the Sponge provided permission ('<modid>.command.<commandname>').
        # Note that setting this to 'true' may cause some commands that are generally accessible to all to
        # require a permission to run.
        # 
        # Setting this to 'true' will enable greater control over whether a command will appear in
        # tab completion and Sponge's help command.
        # 
        # If you are not using a permissions plugin, it is highly recommended that this is set to 'false'
        # (as it is by default).
        enforce-permission-checks-on-non-sponge-commands=false
        # Patches the specified commands to respect the world of the sender instead of applying the
        # changes on the all worlds.
        multi-world-patches {
            defaultgamemode=true
            difficulty=true
            gamerule=true
            seed=true
            setdefaultspawnpoint=true
            time=true
            toggledownfall=true
            weather=true
            worldborder=true
        }
    }
    # Configuratiom options related to debugging features that are disabled by default.
    debug {
        # Detect and prevent parts of PlayerChunkMap being called off the main thread.
        # This may decrease sever preformance, so you should only enable it when debugging a specific issue.
        concurrent-chunk-map-checks=false
        # Detect and prevent certain attempts to use entities concurrently.
        # WARNING: May drastically decrease server performance.
        # Only set this to 'true' to debug a pre-existing issue.
        concurrent-entity-checks=false
        # If 'true', Java's thread contention monitoring for thread dumps is enabled.
        thread-contention-monitoring=false
    }
    # Configuration options related to entities and their performance impact.
    entity {
        # Number of colliding entities in one spot before logging a warning.
        # Set to '0' to disable.
        collision-warn-size=200
        # Number of ticks before a painting is respawned on clients when their art is changed.
        entity-painting-respawn-delay=2
        # Number of ticks before the fake player entry of a human is removed from the tab list
        # (ranges from '0' to '100' ticks).
        human-player-list-remove-delay=10
        # Controls the time in ticks for when an item despawns.
        item-despawn-rate=6000
        # The upper bounded range where living entities farther from a player will likely despawn.
        living-hard-despawn-range=128
        # The amount of seconds before a living entity between the soft and hard despawn ranges
        # from a player to be considered for despawning.
        living-soft-despawn-minimum-life=30
        # The lower bounded range where living entities near a player may potentially despawn.
        living-soft-despawn-range=32
        # Maximum size of an entity's bounding box before removing it.
        # Set to '0' to disable.
        max-bounding-box-size=1000
        # Square of the maximum speed of an entity before removing it.
        # Set to '0' to disable.
        max-speed=100
    }
    # Allows the configuration of the default entity activation ranges.
    entity-activation-range {
        # If 'true', newly discovered entities will be added to this config with a default value.
        auto-populate=false
        # Default activation ranges used for all entities unless overridden.
        defaults {
            ambient=32
            aquatic=32
            creature=32
            misc=16
            monster=32
        }
        # Per-mod overrides. Refer to the minecraft default mod for example.
        mods {}
    }
    # Configuration options related to entity collision checks.
    entity-collisions {
        # If 'true', newly discovered entities/blocks will be added to this config with a default value.
        auto-populate=false
        # Maximum amount of entities any given entity or block can collide with.
        # This improves performance when there are more than 8 entities on top of each other
        # such as a 1x1 spawn pen.Set to '0' to disable.
        max-entities-within-aabb=8
        # Per-mod overrides. Refer to the minecraft default mod for example.
        mods {
            minecraft {
                # Default maximum collisions used for all entities unless overridden.
                defaults {}
                # If 'false', entity collision rules for this mod will be ignored.
                enabled=true
                entities {}
            }
        }
    }
    # Configuration option related to sponge provided exploit patches
    exploits {
        # If 'limit-book-size' is enabled, controls the multiplier applied to each book page size
        book-size-total-multiplier=0.98
        # Enables filtering invalid entities when a chunk is being saved
        # such that the entity that does not "belong" in the saving chunk will not be saved,
        # and forced an update to the world's tracked entity lists for chunks.
        # See https://github.com/PaperMC/Paper/blob/fd1bd5223a461b6d98280bb8f2d67280a30dd24a/Spigot-Server-Patches/0311-Prevent-Saving-Bad-entities-to-chunks.patch
        filter-invalid-entities-on-chunk-save=true
        # Limits the size of a book that can be sent by the client.
        # See https://github.com/PaperMC/Paper/blob/f8058a8187da9f6185d95bb786783e12c79c8b18/Spigot-Server-Patches/0403-Book-Size-Limits.patch
        # (Only affects SpongeVanilla)
        limit-book-size=true
        # Enables focing a chunk load when an entity position is set.
        # Usually due to teleportation, vehicle movement etc. can a position lead an entity to no longer exist
        # within it's currently marked and tracked chunk. This will enable that chunk for the position is loaded.
        # Part of several exploits.
        # See https://github.com/PaperMC/Paper/blob/fd1bd5223a461b6d98280bb8f2d67280a30dd24a/Spigot-Server-Patches/0335-Ensure-chunks-are-always-loaded-on-hard-position-set.patch
        # (Only affects SpongeVanilla)
        load-chunk-on-position-set=true
        # Enables forcing chunks to save when an entity is added or removed from said chunk.
        # This is a partial fix for some exploits using vehicles.
        # See https://github.com/PaperMC/Paper/blob/fd1bd5223a461b6d98280bb8f2d67280a30dd24a/Spigot-Server-Patches/0306-Mark-chunk-dirty-anytime-entities-change-to-guarante.patch
        # (Only affects SpongeVanilla)
        mark-chunks-as-dirty-on-entity-list-modification=true
        # If 'limit-book-size' is enabled, controls the maximum size of a book page
        max-book-page-size=2560
        # Prevents an exploit in which the client sends a packet with the itemstack name
        # exceeding the string limit.
        prevent-creative-itemstack-name-exploit=true
        # Enables forcing updates to the player's location on vehicle movement.
        # This is partially required to update the server's understanding of where the player exists,
        # and allows chunk loading issues to be avoided with laggy connections and/or hack clients.
        # See https://github.com/PaperMC/Paper/blob/fd1bd5223a461b6d98280bb8f2d67280a30dd24a/Spigot-Server-Patches/0378-Sync-Player-Position-to-Vehicles.patch
        # (Only affects SpongeVanilla)
        sync-player-positions-for-vehicle-movement=true
        # Enables forcing a chunk-tracking refresh on entity movement.
        # This enables a guarantee that the entity is tracked in the proper chunk when moving.
        # See https://github.com/PaperMC/Paper/blob/fd1bd5223a461b6d98280bb8f2d67280a30dd24a/Spigot-Server-Patches/0315-Always-process-chunk-registration-after-moving.patch
        # (Only affects SpongeVanilla)
        update-tracked-chunk-on-entity-move=true
    }
    # Contains general configuration options for Sponge that don't fit into a specific classification
    general {
        # If 'true', Sponge will try to ensure that its data is on disk
        # when saving the 'level_sponge.dat' file,
        # but this may cause a slight performance hit.
        # 
        # Setting this to 'false' will mean Sponge does not
        # perform any consistency checks, but you may end up
        # with corrupt data if an unexpected failure occurs on your server,
        # requiring restoring this file from backup.
        check-file-when-saving-sponge-data-file=true
        # The directory for Sponge plugin configurations, relative to the
        # execution root or specified as an absolute path.
        # Note that the default: '${CANONICAL_GAME_DIR}/config'
        # is going to use the 'config' directory in the root game directory.
        # If you wish for plugin configs to reside within a child of the configuration
        # directory, change the value to, for example, '${CANONICAL_CONFIG_DIR}/sponge/plugins'.
        # Note: It is not recommended to set this to '${CANONICAL_CONFIG_DIR}/sponge', as there is
        # a possibility that plugin configurations can conflict the Sponge core configurations.
        # 
        config-dir="${CANONICAL_GAME_DIR}/config"
        # If 'true', sleeping between chunk saves will be enabled, beware of memory issues.
        file-io-thread-sleep=false
        # Additional directory to search for plugins, relative to the
        # execution root or specified as an absolute path.
        # Note that the default: '${CANONICAL_MODS_DIR}/plugins'
        # is going to search for a plugins folder in the mods directory.
        # If you wish for the plugins folder to reside in the root game
        # directory, change the value to '${CANONICAL_GAME_DIR}/plugins'.
        plugins-dir="${CANONICAL_MODS_DIR}/plugins"
    }
    # Automatically assigns (permission) contexts to users that use any of the given ips.
    # This can be used to restrict/grant permissions, based on the player's source or target ip.
    ip-sets {}
    # Configuration option related to logging certain action such as chunk loading.
    logging {
        # Log when blocks are broken
        block-break=false
        # Log when blocks are modified
        block-modify=false
        # Log when blocks are placed
        block-place=false
        # Log when blocks are populated in a chunk
        block-populate=false
        # Log when blocks are placed by players and tracked
        block-tracking=false
        # Log when chunks are queued to be unloaded by the chunk garbage collector.
        chunk-gc-queue-unload=false
        # Log when chunks are loaded
        chunk-load=false
        # Log when chunks are unloaded
        chunk-unload=false
        # Whether to log entity collision/count checks
        entity-collision-checks=false
        # Log when living entities are destroyed
        entity-death=false
        # Log when living entities are despawned
        entity-despawn=false
        # Log when living entities are spawned
        entity-spawn=false
        # Whether to log entity removals due to speed
        entity-speed-removal=false
        # Log when server receives exploited packet with itemstack name exceeding string limit.
        exploit-itemstack-name-overflow=false
        # Log when player attempts to respawn invisible to surrounding players.
        exploit-respawn-invisibility=false
        # Log when server receives exploited packet to update a sign containing commands
        # from player with no permission.
        exploit-sign-command-updates=false
        # Add stack traces to dev logging
        log-stacktraces=false
        # Log when two conflicting changes are merged into one. (This number specifies the maximum number of
        # messages to log. Set to 0 to show all messages.)
        transaction-merge-fail=25
        # Log when a world auto-saves its chunk data.
        # Note: This may be spammy depending on the auto-save-interval configured for world.
        world-auto-save=false
    }
    # Configuration options related to metric collection.
    metrics {
        # The global collection state that should be respected by all plugins that have no specified collection state. If 'undefined' then it is treated as disabled.
        global-state=UNDEFINED
        # Plugin-specific collection states that override the global collection state.
        plugin-states {}
    }
    # Sponge provides a number of modules that allow for enabling or disabling
    # certain specific features. These may be enabled or disabled below.
    # 
    # Any changes here require a server restart as modules are applied at startup.
    modules {
        # Enables experimental fixes for broken mods
        broken-mod=false
        # The BungeeCord Module, allows Sponge to be used with a Proxy like Bungeecord or Velocity.
        # Usually you want to also enable 'bungeecord.ip-forwarding' with this.
        bungeecord=false
        # The entity activation module, allows you to tweak entity activation ranges,
        # similarly to "Entity Distance" in the latest 1.16 snapshots but per mob.
        # Essentially, it changes how far an entity can be away from a player, until it stops being updated (e.g. moving).
        entity-activation-range=true
        # Module that allows you to configure the maximum amount of entities a specific entity or block can collide with.
        entity-collisions=true
        # Controls whether any exploit patches are applied.
        # If there are issues with any specific exploits, please test in the exploit category first,
        # before disabling all exploits with this toggle.
        exploits=true
        # Allows configuring Vanilla movement and speed checks
        movement-checks=false
        optimizations=true
        # Use real (wall) time instead of ticks as much as possible
        realtime=false
        # Controls block range and tick rate of tileentities.
        # Use with caution as this can break intended functionality.
        tileentity-activation=false
        # Module to run Aikar's Timings, profile your server performance and get a sharable web result.
        # https://github.com/aikar/timings#aikars-minecraft-timings-viewer-v2
        timings=true
        # Can be used to disable some parts of the tracking.
        tracking=true
    }
    # Configuration options related to minecraft's movement checks, that can be enabled or disabled.
    movement-checks {
        # Controls whether the 'player/entity moved wrongly!' check will be enforced
        moved-wrongly=true
        # Controls whether the 'player moved too quickly!' check will be enforced
        player-moved-too-quickly=true
        # Controls whether the 'vehicle of player moved too quickly!' check will be enforced
        player-vehicle-moved-too-quickly=true
    }
    # Configuration options related to sponge provided performance optimizations.
    optimizations {
        # Runs lighting updates asynchronously.
        async-lighting {
            # If 'true', lighting updates are run asynchronously.
            enabled=true
            # The amount of threads to dedicate for asynchronous lighting updates. (Default: 2)
            num-threads=2
        }
        # Caches tameable entities owners to avoid constant lookups against data watchers.
        # If mods cause issues, disable this.
        cache-tameable-owners=true
        # Occasionally, some built in advancements, recipes, etc. can fail to deserialize properly
        # which ends up potentially spamming the server log and the original provider of the failing content
        # is not able to fix them. This provides an option to suppress the exceptions printing out in the log.
        disable-failing-deserialization-log-spam=true
        # In vanilla, pathfinding may result in loading chunks.
        # You can disable that here, which may result in a
        # performance improvement. This may not work well
        # with mods.
        disable-pathfinding-chunk-loads=false
        # In vanilla, ray tracing may result in loading chunks.
        # You can disable that here, which may result in a
        # performance improvement. This may not work well
        # with mods.
        disable-raytracing-chunk-loads=false
        # If 'true', block item drops are pre-processed to avoid
        # having to spawn extra entities that will be merged post spawning.
        # Usually, Sponge is smart enough to determine when to attempt an item pre-merge and when not to,
        # however, in certain cases, some mods rely on items not being pre-merged and actually spawned,
        # in which case, the items will flow right through without being merged.
        drops-pre-merge=false
        # Uses theosib's redstone algorithms to completely overhaul the way redstone works.
        eigen-redstone {
            # If 'true', uses theosib's redstone implementation which improves performance.
            # See https://bugs.mojang.com/browse/MC-11193 and
            #     https://bugs.mojang.com/browse/MC-81098 for more information.
            # Note: We cannot guarantee compatibility with mods. Use at your discretion.
            enabled=false
            # If 'true', restores the vanilla algorithm for computing wire power levels when powering off.
            vanilla-decrement=false
            # If 'true', restores the vanilla algorithm for propagating redstone wire changes.
            vanilla-search=false
        }
        # If 'true', provides a fix for possible leaks through
        # Minecraft's enchantment helper code that can leak
        # entity and world references without much interaction
        # Forge native (so when running SpongeForge implementation)
        # has a similar patch, but Sponge's patch works a little harder
        # at it, but Vanilla (SpongeVanilla implementation) does NOT
        # have any of the patch, leading to the recommendation that this
        # patch is enabled "for sure" when using SpongeVanilla implementation.
        # See https://bugs.mojang.com/browse/MC-128547 for more information.
        # 
        enchantment-helper-leak-fix=true
        # If 'true', allows for Sponge to make better assumptinos on single threaded
        # operations with relation to various checks for server threaded operations.
        # This is default to true due to Sponge being able to precisely inject when
        # the server thread is available. This should make an already fast operation
        # much faster for better thread checks to ensure stability of sponge's systems.
        faster-thread-checks=true
        # If 'true', re-writes the incredibly inefficient Vanilla Map code.
        # This yields enormous performance enhancements when using many maps,
        # but has a tiny chance of breaking mods that invasively modify Vanilla.
        # It is strongly reccomended to keep this on, unless explicitly advised otherwise by a Sponge developer
        map-optimization=true
        # Based on Aikar's optimizations of Hoppers, setting this to 'true'
        # will allow for hoppers to save performing server -> client updates when transferring items.
        # Because hoppers can transfer items multiple times per tick, these updates can get costly on the server,
        # with little to no benefit to the client. Because of the nature of the change,
        # the default will be 'false' due to the inability to pre-emptively
        # foretell whether mod compatibility will fail with these changes or not.
        # Refer to: https://github.com/PaperMC/Paper/blob/8175ec916f31dcd130fe0884fe46bdc187d829aa/Spigot-Server-Patches/0269-Optimize-Hoppers.patch
        # for more details.
        optimize-hoppers=false
        # If 'true', uses Panda4494's redstone implementation which improves performance.
        # See https://bugs.mojang.com/browse/MC-11193 for more information.
        # Note: This optimization has a few issues which are explained in the bug report.
        # We strongly recommend using eigen redstone over this implementation as this will
        # be removed in a future release.
        panda-redstone=false
        # Handles structures that are saved to disk. Certain structures can take up large amounts
        # of disk space for very large maps and the data for these structures is only needed while the
        # world around them is generating. Disabling saving of these structures can save disk space and
        # time during saves if your world is already fully generated.
        # Warning: disabling structure saving will break the vanilla locate command.
        structure-saving {
            # If 'true', newly discovered structures will be added to this config with a default value of 'true'.
            # This is useful for finding out potentially what structures are being saved from various mods,
            # and allowing those structures to be selectively disabled.
            auto-populate=false
            # Global switch to enable sponge's changes to the structure saving mechansim.
            # By default, this option is disabled, i.e. saving structures is not affected.
            # If you want to prevent that a certain "named" structure is saved to the world's folder,
            # you have to enable this module/setting and disable the structure in the further settings.
            # An example of a structure that is costly and somewhat irrelevant is 'mineshaft',
            # as they build and save several structures even after the mine shafts have been completely generated.
            # However, this has the disadvantage that these structures may no longer be locatable by some mods.
            enabled=false
            # Per-mod overrides. Refer to the minecraft default mod for example.
            mods {
                minecraft {
                    # Global flag, whether this mod's structures will be saved.
                    # If 'false', this mod will never save its structures.
                    # If 'true', it will check the 'structureList' for disabled structures.
                    enabled=true
                    # The configuration for each struture.
                    # A value of 'false' prevents that struture from being saved.
                    # Entries that are either missing in this list or have the value 'true' will still be saved,
                    # unless the structure saving of the mod is globally disabled.
                    structures {
                        mineshaft=false
                    }
                }
            }
        }
        # Vanilla performs a lot of is area loaded checks during entity collision calculations with blocks,
        # and because these calculations require fetching the chunks to see if they are loaded,
        # before getting the block states from those chunks, there can be some small performance
        # increase by checking the entity's owned active chunk it may currently reside in.
        # Essentially, instead of asking the world if those chunks are loaded, the entity
        # would know whether it's chunks are loaded and that neighbor's chunks are loaded.
        use-active-chunks-for-collisions=false
    }
    # Configuration options related to permissions and permission handling
    permission {
        # If 'true', Sponge plugins will be used to handle permissions rather than any Forge mod
        forge-permissions-handler=false
    }
    # Configuration options related to tracking player interactions with blocks
    player-block-tracker {
        # Block IDs that will be blacklisted for player block placement tracking.
        block-blacklist=[]
        # If 'true', adds player tracking support for block positions.
        # Note: This should only be disabled if you do not care who caused a block to change.
        enabled=true
    }
    # Used to control spawn limits around players.
    # Note: The radius uses the lower value of mob spawn range and server's view distance.
    spawner {
        # The number of ambients the spawner can potentially spawn around a player.
        spawn-limit-ambient=15
        # The number of animals the spawner can potentially spawn around a player.
        spawn-limit-animal=15
        # The number of aquatics the spawner can potentially spawn around a player.
        spawn-limit-aquatic=5
        # The number of monsters the spawner can potentially spawn around a player.
        spawn-limit-monster=70
        # The ambient spawning tick rate. Default: 400
        tick-rate-ambient=400
        # The animal spawning tick rate. Default: 400
        tick-rate-animal=400
        # The aquatic spawning tick rate. Default: 1
        tick-rate-aquatic=1
        # The monster spawning tick rate. Default: 1
        tick-rate-monster=1
    }
    # Configuration options related to the Sql service, including connection aliases etc
    sql {
        # Aliases for SQL connections, in the format jdbc:protocol://[username[:password]@]host/database
        aliases {}
    }
    # Blocks to blacklist for safe teleportation.
    teleport-helper {
        # If 'true', this blacklist will always be respected, otherwise, plugins can choose whether
        # or not to respect it.
        force-blacklist=false
        # Block IDs that are listed here will not be selected by Sponge's safe teleport routine as
        # a safe block for players to warp into.
        # You should only list blocks here that are incorrectly selected, solid blocks that prevent
        # movement are automatically excluded.
        unsafe-body-block-ids=[]
        # Block IDs that are listed here will not be selected by Sponge's safe
        # teleport routine as a safe floor block.
        unsafe-floor-block-ids=[]
    }
    # Configuration options related to activation ranges of tile entities.
    tileentity-activation {
        # If 'true', newly discovered tileentities will be added to this config with default settings.
        auto-populate=false
        # Default activation block range used for all tileentities unless overridden.
        default-block-range=64
        # Default tick rate used for all tileentities unless overridden.
        default-tick-rate=1
        # Per-mod overrides. Refer to the minecraft default mod for example.
        mods {}
    }
    # Module to run Aikar's Timings, profile your server performance and get a sharable web result.
    # https://github.com/aikar/timings#aikars-minecraft-timings-viewer-v2
    timings {
        # Enables the timing module
        enabled=true
        # These configuration entries/paths/sections are removed before the report is sent.
        # This is to prevent credentials from being leaked unintentionally.
        # Note: The 'sponge.sql' section is always ignored
        # and thus is never sent to the webviewer regardless of this config.
        hidden-config-entries=[
            "sponge.sql"
        ]
        # Modulo value how often a tick should be pushed to the timings history
        history-interval=300
        # How long the list of said history can get
        history-length=3600
        # Hides the server name in the Aikar webviewer to no leak the l33t server you are running
        server-name-privacy=false
        # Enables the verbose mode for the timings module.
        verbose=false
    }
    # Configuration options that will affect all worlds.
    world {
        # The auto-save tick interval used when saving global player data. (Default: 900)
        # Note: 20 ticks is equivalent to 1 second. Set to 0 to disable.
        auto-player-save-interval=900
        # The auto-save tick interval used to save all loaded chunks in a world.
        # Set to 0 to disable. (Default: 900)
        # Note: 20 ticks is equivalent to 1 second.
        auto-save-interval=900
        # The number of newly loaded chunks before triggering a forced cleanup.
        # Note: When triggered, the loaded chunk threshold will reset and start incrementing.
        # Disabled by default.
        chunk-gc-load-threshold=0
        # The tick interval used to cleanup all inactive chunks that have leaked in a world.
        # Set to 0 to disable which restores vanilla handling. (Default: 600)
        chunk-gc-tick-interval=600
        # The number of seconds to delay a chunk unload once marked inactive. (Default: 15)
        # Note: This gets reset if the chunk becomes active again.
        chunk-unload-delay=15
        # If 'true', any request for a chunk not currently loaded will be denied
        # (exceptions apply for things like world gen and player movement).
        # Warning: As this is an experimental setting for performance gain,
        # if you encounter any issues then we recommend disabling it.
        deny-chunk-requests=false
        # If 'true', any neighbour notification for a chunk not currently loaded will be denied
        # Warning: As this is an experimental setting for performance gain,
        # if you encounter any issues then we recommend disabling it.
        deny-neighbor-notification-chunk-requests=false
        # The interval, in seconds, used by the GameProfileQueryTask to process queued GameProfile requests. (Default: 4)
        # Note: This setting should be raised if you experience the following error:
        # "The client has sent too many requests within a certain amount of time".
        # Finally, if set to 0 or less, the default interval will be used.
        gameprofile-lookup-task-interval=4
        # If 'true', this world will generate its spawn the moment its loaded.
        generate-spawn-on-load=false
        # The list of uuid's that should never perform a lookup against Mojang's session server.
        # Note: If you are using SpongeForge, make sure to enter any mod fake player's UUID to this list.
        invalid-lookup-uuids=[
            "00000000-0000-0000-0000-000000000000",
            "0d0c4ca0-4ff1-11e4-916c-0800200c9a66",
            "41c82c87-7afb-4024-ba57-13d2c99cae77"
        ]
        # The defined merge radius for Item entities such that when two items are
        # within the defined radius of each other, they will attempt to merge.
        # Usually, the default radius is set to 0.5 in Vanilla, however, for performance reasons
        # 2.5 is generally acceptable.
        # Note: Increasing the radius higher will likely cause performance degradation
        # with larger amount of items as they attempt to merge and search nearby
        # areas for more items. Setting to a negative value is not supported!
        item-merge-radius=2.5
        # If 'true', this worlds spawn will remain loaded with no players.
        keep-spawn-loaded=true
        # If 'true', natural leaf decay is allowed.
        leaf-decay=true
        # If 'true', this world will load on startup.
        load-on-startup=false
        # The maximum number of queued unloaded chunks that will be unloaded in a single tick.
        # Note: With the chunk gc enabled, this setting only applies to the ticks
        # where the gc runs (controlled by 'chunk-gc-tick-interval')
        # Note: If the maximum unloads is too low, too many chunks may remain loaded on the world
        # and increases the chance for a drop in tps. (Default: 100)
        max-chunk-unloads-per-tick=100
        # Specifies the radius (in chunks) of where creatures will spawn.
        # This value is capped to the current view distance setting in server.properties
        mob-spawn-range=4
        # A list of all detected portal agents used in this world.
        # In order to override, change the target world name to any other valid world.
        # Note: If world is not found, it will fallback to default.
        portal-agents {
            "minecraft:default_the_end"=DIM1
            "minecraft:default_the_nether"=DIM-1
        }
        # If 'true', this world will allow PVP combat.
        pvp-enabled=true
        # Override world distance per world/dimension
        # The value must be greater than or equal to 3 and less than or equal to 32
        # The server-wide view distance will be used when the value is -1.
        view-distance=-1
        # If 'true', natural formation of ice and snow in supported biomes will be allowed.
        weather-ice-and-snow=true
        # If 'true', thunderstorms will be initiated in supported biomes.
        weather-thunder=true
        # If 'true', this world will be registered.
        world-enabled=true
    }
    # World Generation Modifiers to apply to the world
    world-generation-modifiers=[]
}